Bee Watering Station Concrete Mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Concrete mold for a concrete bee watering station.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Two part mold for a bee watering station. Mold can be printed out of PLA. The part with the dome needs a higher infill to be re-used. Parts are clamped together to be filled with concrete and then can be separated to remove the model. For easy removal spray or wipe both sides of mold with cooking spray or vegetable oil for easy removal. Concrete around the opening needs to be cleaned if it spills over. Concrete needs to be sieved to remove large rocks as this is a small mold and large rocks will cause it to crack. I used quikset concrete that sets in 20-40 minutes and it needed to cure for a week before removing from the mold.