1 / 1
Touring Car (TC) Tire Saucer / Break in — zdjęcie 1

Touring Car (TC) Tire Saucer / Break in

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Touring car tire sauce machine

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
67
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

This is a tire sauce machine for touring cars that is powered by a 12v supply.  Although It is a work in progress and I plan to make more updates, it works as is.  It takes 12 M3x6mm screws and 4 10x15x4mm bearings, wire length to your liking, two banana plugs, as well as a 12v motor from amazon (Greartisan DC 12V 20RPM Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Centric Output Shaft 37mm Diameter Gearbox).  It is pretty easy to put together, but I can provide some instructions if needed.  The print tolerances are very tight and I might ease them at some point, so since every printer is different you might need to do some slight sanding/filing.  This is a project and people can make suggestions, changes, etc.  I tried to make everything printer friendly and easy to print without any supports.  You should probably print everything with a minimum of 4 walls and 15-20% infill.

Amazon.com: Greartisan DC 12V 20RPM Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Centric Output Shaft 37mm Diameter Gearbox : Toys & Games