Handle Extruder & Form (ripple)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pull style extrusion handle with set-up form RIPPLE FORM PROFILE Handle Form - Ring Ring type
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Open Community License v1
Pull-style extrusion tool for a ripple style handle with an circular ring ring handle form for setting up.
NOTE: Separate objects when imported and print as "complete individual objects'. It should choose and print from front to rear. Disregard the collision warning, it doesn't collide.
Handle dimensions 25 wide x 8 thick, form length approx. 160mm
Slight sanding on internal surface of form foot to ensure smooth fitting.
Extra material requirement
1 x 8mm dowel or bamboo segment sanded with fine taper at one end to suit tool hole.
1 x 8g -16mm self tapper (printed form is threaded to suit
Set dowel into tool until it seats then drill 3mm hole through dowel to fit screw.