1 / 4
Steel City 40100 Planer T2-51 Bevel Gear Replacement — zdjęcie 1
1 / 4

Steel City 40100 Planer T2-51 Bevel Gear Replacement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement bevel gear for the Steel City 40100 planer Part T2-51. Transmits motion between shafts for height adjustment

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
0
Wyświetlenia
59
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Replacement bevel gear for the Steel City 40100 planer, Part T2-51. This gear is part of the drive train and transfers rotational motion between the intersecting shafts for height adjustment.

This model is intended to replace a worn, cracked, or stripped factory gear.

Design Notes

  • Modeled to match the original T2-51 bevel gear geometry

  • Maintains correct shaft interface and gear mesh profile

  • Designed for dimensional accuracy and proper tooth engagement

Material Recommendation

This is a load-bearing, rotating component inside a woodworking machine.

  • Nylon or carbon fiber reinforced Nylon minimum recommended

  • Do not use PLA

  • Optimal choice would be to use a metal 3D printing service and have them done in aluminum

Print Settings (if 3D printing)

  • 5 to 6 perimeters minimum

  • 100 percent infill

  • 0.08 mm layer height

  • Supports enabled

  • Slow outer wall speed for improved tooth accuracy

Post Processing

  • Lightly deburr teeth

  • Check backlash and smooth rotation before full operation

  • Lubricate appropriately

https://buymeacoffee.com/prairieforge3d