SAVU Carrying Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SAVU Carrying CaseThe CaseA case to transport the Savu Whisky Tasting glass. (https://savuglass.com/)Take your SAVU on…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SAVU Carrying Case
The Case
A case to transport the Savu Whisky Tasting glass. (https://savuglass.com/) Take your SAVU on the road and enjoy the fine aroma's everywhere you go thanks to the amazing qualities of the Savu glass. With this 3D printed travel case you can be sure your glass is safe to travel with you. For extra security cut a rubber 40mm ring in two and add this in the slot where the neck of the glass rests.
Printing
I printed this in PETG with a 15% infill but other filaments will function just as well. When printing the case parts with the opening face down supports are not needed. The clips are best printed standing without supports. You will need the Right and the Left part both once and the Clip twice. The clips need to be forced into the Left case part and function both as a hinge and lock. Initial opening may be a tight fit, this will loosen after a few cycles.
Copyright
The 'U' logo on the top of the container and clips is proprietary and has been used under approval of Noble Glass OY, Finland and may not be used or modified without prior approval
Category: Containers