Satoru Gojo Silhouette – Easy 3D Print Desk Display (No Supports)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Satoru Gojo silhouette 3D model designed as a simple desk display. Easy to print with PLA, no supports needed, and wor
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 2D silhouette model of Satoru Gojo designed as a decorative display for your desk or shelf.
The model is simple and easy to print, making it suitable for beginners or quick prints. It works great as an anime decoration or collection item.
Print Settings I used:
Printer: Creality Ender 3 V3 SE
Material: PLA / PLA+
Layer height: 0.2 – 0.28 mm
Infill: 10–15%
Supports: Not required
Tips for better results:
Enable Ironing in your slicer if you want the top surface to look smoother and cleaner.
Printing with black filament is recommended for a strong silhouette look.
Notes:
The base slot is slightly longer than the model tab. This was part of the testing process.
If you want, you can modify or improve it, but it should still fit and stand perfectly as it is.Be careful when removing the print from the build plate.
The bottom part of the base is quite thin. If you remove it immediately while it is still hot and soft, the base may bend while cooling and hardening.
It is better to wait a little until it cools down.I would really appreciate your support!
Follow my Instagram: @syhrl._rmdhn
If you have suggestions or improvements for this model, feel free to send me a DM.
