Moza SRP-Lite Angled Spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacers to attach SRP Pedals at an angle
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 493
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
I modeled this to angle my pedals on a wooden platform I made, the models listed are at 15° and 22° from the FLOOR, the pictures show the 22°, you need to lift the back 1.5in and 3in for the 15° and 22° respectively, that being said you can use the FreeCAD file to customize it to any angle you want, be aware that too high or too low angles will brake some parts or the whole thing, just Ctrl+Z and adjust the angle.
Make sure to use FreeCAD 1.2 or up, there's a VarSet in there where you can enter the angle and the height of the back support with respect to the front, after that you can export it to your slicer and you should be good to go,