MayAudio Aether (DIY Hifi/Gaming Headphone)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY Hifi Open-back Headphone using high quality 50mm drivers. Designed in Finland. Made for pure sound quality.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 217
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hifi Open-back Headphone using high quality 50mm drivers.
The goal of this headphone was to make something bright, open and soundstagey sounding. Akin to Hifiman headphones but sounding more lively. Treble is smoothly elevated, and bass is present.
Has more subbass than the HD600. Gaming performance is superb due to good imaging performance.
Made to work with any headband, headphone diameter is 86mm.
Parts:
- Headband: https://www.aliexpress.com/item/1005007635621035.html For a 3d printable headband, print this one: https://www.printables.com/model/1108653-capra-headband-v3 But with the Satyr 2 (New 3.5mm (more screws)) yokes from this one: https://www.printables.com/model/908999-satyr-2-diy-hifi-headphones/files
- Driver (buy two): https://www.digikey.com/en/products/detail/ole-wolff-electronics-inc/OWR-5088TA-32/16343863
- Earpads: https://www.amazon.com/SOULWIT-Cooling-Replacement-Cushions-High-Density/dp/B0DJ2PB9TV
- Heat inserts: https://www.aliexpress.com/item/1005007973137842.html / https://www.amazon.com/Yaocom-Inserts-Threaded-Printing-Components/dp/B0DG59PW2R
- Micropore tape: https://www.amazon.com/dp/B000O62TK4
- Sockets: https://www.amazon.com/dp/B0833WYLWQ
- Internal wires: https://www.amazon.com/BNTECHGO-Flexible-Conductor-Resistant-Extension/dp/B077XBWX8V
- Screws: any M3 screws https://www.amazon.com/Machine-Screws-Countersunk-Phillips-Assortment/dp/B0CCPH974T / https://www.aliexpress.com/item/1005009185417112.html
- Cable: any 2x 3.5mm cable, recommended: https://www.aliexpress.com/item/1005004033677985.html
- 47 Ohm Resistor: https://www.amazon.com/BOJACK-Resistor-Ohm-5-6M-Resistors-Assortment/dp/B07P3MFG5D
- PLA filament: use any decent quality PLA, recommended: https://www.amazon.com/Polymaker-Filament-1-75mm-Rigidity-Cardboard/dp/B099KS2PDW
Assembly instructions: https://github.com/Maja5Dev/MayAudio-Knight/blob/main/Assembly%20instructions.md
Designed in Finland.
Join our discord server: https://discord.gg/FM5Sw2YNhX
Support us on kofi: https://ko-fi.com/maya224696