SwitchBot Lock Cover (Sheath) for lock body and knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover for the original SwitchBot Lock (non-Pro/non-Ultra) for both the lock body and the knob.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a cover for the original SwitchBot Lock (non-Pro/non-Ultra) for both the lock body and the knob.
As every installation of the SwitchBot lock is a bit different, depending on the underlying lock you are using it with, it's not possible to make a one-size-fits-all cover for the main body of the SwitchBot lock. This model here was created for my particular scenario and likely won't fit yours without modifications.
Therefore I added the Autodesk Fusion files so you can adjust it to your needs (also added step files). The model for the lock body is really two main pieces (two boxes). Adjust (or remove) the second box as needed for your scenario.
The knob cover was designed to fit under the body cover. It prints with a retainer ring that looks like a brim. Print it with tree supports and carefully remove the print from the build plate without destroying the brim. Ensure to put the knob cover on the lock before you slide the body cover on.
Body: Print with hole facing down. 0.2mm layer height, no supports or brim needed.
Knob: Print with disk facing down. 0.2mm layer height, tree supports, no additional brim needed. Keep the brim that's part of the model as it's needed as a retainer ring.
I'm not an expert at modeling and this is only my third model I am creating for myself. Feel free to ask questions or make suggestions for a better model.
Thank you!