Thickness Plates for Measuring Thickness on Lucy Clay Machine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thickness plates for measuring thickness / setting the exact gap between the rollers on Lucy Clay Machine.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Be careful when using them: do not damage the rollers and never use filaments containing metal.
For best accuracy, place two identical plates — one on each end of the rollers — when testing the gap. This ensures the rollers are set perfectly parallel and prevents tilting. The plates should slide through smoothly but without excessive force.
This method provides a reusable, consistent reference and eliminates variations caused by differences in card stock thickness.
We have prepared downloadable plates in thicknesses 0.5 mm, 1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, and 5 mm.
Please pay attention to the layer height when 3D printing. If you require precision within 0.1 mm, be aware that using a layer height of 0.2 mm will cause the printed thicknesses of 0.5 mm, 1.5 mm, and 2.5 mm plates to be approximately ±0.1 mm off.