Aeon Trespass Odyssey - All In (With Minis!) Core Box Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for all content, Cycles 1 through 5, in the core box. Including Miniatures and Onwards Odyssey, excluding Tiles.
- Ocena
- 0 / 5
- Polubienia
- 11
- Wydruki
- 0
- Wyświetlenia
- 2309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Standard Digital File License
These are print files for a HUGE insert to store ALL game content for ALL cycles within the core box! All cards, tokens in individual trays, all miniatures, Onwards Odyssey! Only thing not included are the luxury map tiles.
Please see outside printables:
A description of all the trays and the process to put in the box is here.
See this document for detailed description and printing instructions.
A more complete photo gallery of all trays, with game elements and without, and a video description, here.
See here a video of how to store all the minis.
This is a MASSIVE insert - 3.5 kg, with 63 trays and over 50 dividers. This is designed to be not only a tool for storage, but to get the game to the table quickly and be very useful during play. For example:
Invidual trays for Tokens, each with lids, labels for all tokens, and wells adjusted for number of tokens.
One tray for all Trauma cards, organized by Minor, Major, Grave and with space for storage and Obol total deck and current Obol deck
Each argonaut/player has an individual tray, where you can store their cards, mnemos and triskelion. These trays can also be used during play, allowing you to slot cards vertically during use.
Each cycle has separate trays, only take out the one for your cycle.
All secrets and decks are clearly labeled and with dividers.
All trays have labels for all their content.
Miniatures are stored in per-cycle trays, and in a way they do not rub each other (except the base in the minis that must slide in rails - thinking about painters!).
Specific tray to save your campaign progress - the 'armory' - crafted gear, projects, techs, mnemos vault, etc.
7 'extra' trays to store mini, standard cards and other components you want.
Small lid lift of ~12mm.
Rulebooks and board can fit… with more lid lift.
If you want no lid lift, the token trays and the Trauma trays have to be stored outside the insert. Then all can fit inside.
Sleeving...
The insert will fit all decks sleeved except technologies and gear.
If you want to sleeve all, the insert comes with extra unused trays to store mini and standard cards. You would need to fit as many gear and tech as possible on each cycle's trays, and then overflow into these trays. With 50 micron sleeves most or all will fit. With 100 micron sleeves, you will have to have a system to manage storing some of them in these other trays.
With this purchase, you are getting:
The print instructions and quick reference guide linked above.
A checklist to help you track your printing.
109 3mf files with multiple bodies, ready for quick color printing.
My continued support, with your email, I will send you any updates done to the insert.
Any suggestions for improvements or new ideas, within reason, will be implemented and shared with all.
As well any errors community finds will be fixed and shared. (that being said this is tested and should not have huge errors besides spelling and such).
Example - my C45 insert, now I am on version 13...
Let me know any questions! Also please...
for discounts... contact me on discord, Juan__v (two underscores)
if you have bought one of my previous inserts, contact me, I will discount this.
1.00
Initial Release.
1.01
Added instructions for Snapmaker Orca Slicer.
1.02
Thanks to two Discord buyers for their thorough review!
Removed design bodies (which should not be printed) from Player Trays (Body2, Body3).
To print guide:
Added a ‘Printing Tips’ section for the notes below.
Added note to instructions on symbols on mini trays and coloring guide.
Added note to instructions on trays with texts bodies on the sides (this is optional to print as a separate color).
Added more info on how many dividers to print and for what cycles. And organized dividers by General or Cycle in subfolders.
Fixed side text alignment for Titans123 tray. And changed wrong label Gamechanger to Logicbreaker.
Mono lids were both in "Various Trays" and "Mono Lids", removed from Various Trays.
Fixed some letters appearing in Conditions – Lid, Encounter – Lid and Voyage - Lid as Body#.
Quick reference guide:
Added instructions what do to with Surprise Box 1 and 2 and secret Envelopes.
Fixed small mistake in the Quick Reference Guide, #7 was Cycle 4 should be Cycle 5.
Fixed wrong label on C123 Adversaries (was Pursuer, should be Burden).
Remade Onwards Odyssey Tray entirely – change in orientation during design caused import problems in some slicers.
Encounters – Lid has some errors in 2 bodies (fixable in the slicer by repairing). I have no idea how to fix this….
1.03
Fixed spelling of Trireme in Encounters – Lid.
As above, remade Onwards Odyssey Tray – Lid, which was having same problem as the main tray.
Corrected names of all bodies of text on the walls of Lids as Side Text. No other changes. Normally I print these side texts the same color as Main body to save print time and material waste.
Changed photo gallery from imgur to google photos (as imgur is being blocked in the UK).
1.04
Important - Cycle 2 minis tray had a horizontal surface which would need supports to print. Fixed this by adding a 45 degree chamfer below like all other parts in the mini trays.
Corrections to Prusa XL print files:
Added dividers organized by print beds, with them separated by cycle (so you can print each cycle in different colors).
Corrected error in All In - Dividers.3mf print file (only had one copy of Mini - Exploration Active x 5).
Fixed body names of Tarot - Various - Secrets 14, Tarot - Secrets 16.
Dividers:
Corrected location of some dividers from Dividers\All Cycles should have been in Dividers\General, moved them.
Added tip to print dividers facing down!
1.05
Important - C123 Secrets was too small for all the secret decks that should be there and labels where wrong. Also changed text to indicate only Small Envelopes go here.
Dividers Mini - Various - Kintsukuroi Pharos Playload/Secrets 17/Argonauts/Cycle III Gear where too wide, now made the right size.
C123 Adv tray, space for minis at bottom had ramp too high and required pushing minis in a bit hard. Made ramp 1mm lower. Text was ‘floating’ and would detach quite easily if it printed at all – fixed.
Video has mistake - mislabels Abysswatcher as Feareater in the Various tray. Cannot edit video unfortunately, so adding in description and as close caption.
Secrets 14 is in the generic dividers folders instead of C4.
Quick Reference Guide:
Added explanation to Quick Reference Guide on where the how C45 Secret Boxes cannot be stored, and where their content can be stored when opened.
Added explanation the larger envelopes do not fit the C123 Secrets tray – this is by design, unfortunately I could not find space for them. Must be placed at top or on the side of the box.
Added new page to Quick Reference Guide showing how tokens go into the trays, especially the Voyage Tray – which was quite difficult to arrange without being familiar with game.
For the Mini C4 tray, the labels for #s on Babelian Lunacy parts was wrong. Fixed.
C123 Terrain – Bottom labelled as 12 2x2 terrain tiles, game has 13. Corrected text.
Added a new tray, Extra Tray 5 (Dice).3mf. This sites in empty space above character trays and next to Dice and Various tray. In Dice and Various, some dice do not fit flat and make the tray above be not level. This new tray offers more spacious storage for the dice, and better organized. Also, if like me, you have 2 dice sets, then you can store both this way.
Added explanation for 2 Condition tray versions to Alternates section.
1.06
Forgot to include new dividers of the right side that were supposed to be in 1.05: Mini - Various - Kintsukuroi Pharos Playload/Secrets 17/Argonauts/Cycle III Gear
Cleaned up checklist excel (removed mono and alternate entries).
Cycle 5 – Primordials had a body called body37, renamed to Trim.
Included the C123 Terrain – Bottom file, which was not included in 1.05.
First buyer printing for painted minis found all rails for minis worked well, except the rail for Midascore in Cycle 4.3mf mini tray. Expanded the size of the rail by 1mm which should address problem. He has printed this and told me painted mini now slides in perfectly well.
Trauma.3mf was not included in the checklist.
1.07
Updated print time table in this document.
Added Trauma tray alternate with wider space front row.
User reported that with 100 microns, cards were quite tight, which made drawing and especially returning cards difficult. Each space increased from 8.8mm to 11mm. Shouldn’t cause a problem with fit within the insert.
As this doesn’t affect fit within the box and barely increases lid lift, I recommend this alternate.
A nice update to all mini trays:
The current trays were 1.2mm thick. Some didn’t feel strong enough, they could bend a bit with the weight of the minis. Also, with 0.4 nozzle, that’s 3 print lines – this made artifacts from inside shapes show up on outer shell, didn’t look good.
Now all trays are 1.7mm thick. Not much but this: 1. Makes trays stronger (seems a small change but this is adding a third the width to all outer walls) and 2. Given it is 4 print lines, outer perimeter will show much smoother.
Used this review to do small tweaks and adjustments to designs. Small changes, some esthetical, some helping the structure. Minor changes, absolutely no need to reprint for people who have already printed them.
This adds print time and weight but I think it is well worth it. I will not be providing the old trays (if someone wants it find it in a previous release!).
I have tested these new inserts with my miniatures, they worked very well! The change in width in the walls makes a huge difference, they feel much more solid!
Added note on print instructions on what the Sig and Sig3D bodies are.
Added file for mini rings: Mini Rings x 4.stl in the mini folder, and a note to instructions about its use.
Added new large card dividers for the Large Cards tray. See section in Alternates.
1.08
Secret 14 divider was 124mm, tray 123mm. Resized to 122mm.
C123 Map Cards had the logos for Cycle 1 and Cycle 3 swapped on one of the sides. Fixed!
Print files for Prusa XL (does anyone use these besides me?) had Cycle 3 L tray duplicated and with Cycle 2 colors. Now removed duplicate and added the correct Cycle 2 L tray.
Added alternates to support a new Separated Conditions Tray: see new section in Alternates. Replaces C45 Conditions Cards with a very nice tray to store all Condition cards separated and with names for quick access. New Extra Tray - 4 (with Tokens) to store tokens that were stored in previous Conditions tray.
IMPORTANT: With the 1.07 update, I thickened the walls of all mini trays. Titans123 had a mistake in the exported file in that version (a wall on the side where one shouldn’t be, the tab for Gamechanger disconnected from side, etc). In this version, this is fixed. Also took the chance to make some small tweaks to the tray.
If you have printed a previous version, no need to reprint.
A user reported the rails/guides for Solon, Herodotus, Skyseer, Ulyssea and Logicbreaker were too tight, added 1mm space to the rails.
Added C2 Sabotage divider. What other dividers do we need to add?
Renamed all dividers to contain within their name the cycle they belong to, when applicable. Made explanation for dividers clearer.
Added explanation of trays that required supports (this was missing) on this section. Only on Token Trays, on the obvious bridge in the bottom.
Fixed secret decks for C4 and C5 in Quick Guide.