1 / 4
38mm & 50mm Pole Mounts For Reolink RLC-810A — zdjęcie 1
1 / 4

38mm & 50mm Pole Mounts For Reolink RLC-810A

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fits satellite dish mounts that I have.

Ocena
0 / 5
Polubienia
6
Pobrania
17
Wydruki
0
Wyświetlenia
134
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Open Community License v1

🟩 🟦 🟦 🟪 🟥 🟧 🟨

This is a simple mount to attach a Reolink RLC-810A to a 38mm or 50mm mount originally intended for a satellite dish. It requires the following hardware to assemble:

  • 7x M4 heat set inserts (Ruthex or CNC kitchen)

  • 4x M4x20 screws

  • 3x M4x12 screws

This features a TPU liner facing the pole, to hopefully help it work a bit better when printing with PETG. However, I have discovered printing these is nicer with the super stiff "TPU for AMS" for the whole thing, as its very strong, stays flush with the plate, retains the M4 inserts and also flexes a bit for the pole and prints fast.

If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!

🟩 🟦 🟦 🟪 🟥 🟧 🟨

Tagi