M84 Flashbang Stun Grenade with Flying Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M84 Flashbang Stun Grenade with Flying Handle
- Ocena
- 5 / 5
- Polubienia
- 276
- Pobrania
- 887
- Wydruki
- 2
- Wyświetlenia
- 5825
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 1:1 scale model of the famous M84 Stun Grenade, better known as a Flashbang. This grenade has articulated pin and handle – the handle can be optionally configured ot be spring loaded and fly off when released. This grenade is used to stun the occupants in a room or small area to assist with hostage rescue, room clearing, etc. Almost everyone has seen a movie or played a game that had a flashbang in it.
The model is easy to snap together, no glue is required.
Metal Spring (recommended) – if you have a metal spring, even a pen spring will usually work, then print the metal spring profile. It is designed to work with the Bambu Store's 0.5x7x12mm spring (linked lower on the page). If you use a pen spring, you can usually cut it in half and get two springs.
Plastic Spring – if you don't have a metal spring, but still want the handle to fly off, then print the plastic spring profile.
If the spring eventually wears out, just print a new one and pop it in.
Don't leave the spring under tension when not using it as it will wear out much faster.
Avoid Matte and Silk filament for the spring itself, Basic and Metal work better.
No Flying Handle - if you don't want the handle to fly off and just want a grenade model, simply print either version and don't put in a spring.