1 / 1
Duender Belt Dragonburner X Carriage 3mm Lower — zdjęcie 1

Duender Belt Dragonburner X Carriage 3mm Lower

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

When building my duender, I was using 3/16 plate for the Y axis instead of the 1/8. This lowers the hotend mount by 3mm

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
86
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

When building my duender, I was using 3/16 plate for the Y axis instead of the 1/8". Thats about 1.59ish millimeters, and due to that it doesn't reach the bed as it is. This lowers the entire dragonburner mount down by 3mm.

Apologies for the file, I'm really bad at cad.