1 / 1
Remix of Bowden Tube guide
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sturdier “pivot thingy” making it less breaking-prone.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
In this original project I had issues with the neck thickness of the “pivot thingy”, as it is referred to by the designer.
After a few reprints, I had to make it sturdier enough by making the “pivot thingy”’s neck thicker than the original one. I think I also redesign the connector ball-joint a little bit to make it bigger and fitting its receptacle better.
After printing my redesign, never had a break again.