1 / 4
Honda EF Civic/CRX adapter for CF-13 adjustable flasher relay — zdjęcie 1
1 / 4

Honda EF Civic/CRX adapter for CF-13 adjustable flasher relay

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Honda EF Civic/CRX adapter for CF-13 adjustable flasher relay

Ocena
0 / 5
Polubienia
3
Pobrania
8
Wydruki
0
Wyświetlenia
185
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I have a 1989 Honda CRX Si.  After installing LED turn signal bulbs, I ended up with the hyper-flashing issue.  There are many compatible flasher relays available (like the one linked below), but I couldn't find any that fit the fuse box in my CRX.  The pin size/orientation is correct, but the housing is a few mm too large.

This model is for a replacement housing into which you can install the PCB from one of these relays.

Example part: https://www.amazon.com/dp/B0CWNQJFX9

To install:

  • Snap the existing housing cover off

  • Use wire cutters or a box knife to (carefully) liberate the PCB from the plastic base

  • Press on the replacement base

    • Be careful to note the orientation base plate

    • The side that printed facing up goes towards the PCB)

    • You might need to apply a bit of heat to the connector spades with a soldering iron (be patient, be careful)

  • Snap the top cover on

  • Install the relay into your EF Civic/CRX fuse box

  • Bask in the glory of the metronomic flasher clicks

My guess is this will also fit the DA Integra and other similarly old Honda/Acura cars.

Tagi