Bruno's Wall Preventer — Spoiler Backing Plate for 1/10 Touring Car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Backing plates that spread screw load on lexan bodies. Keep your wing where it belongs — inspired by a true race story.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by a true story.
At TITC 2026, Bruno Cohelio lost his rear wing mid-race and ended up in the wall. This small part exists so that never happens to you.
These oval backing plates sit between the screw head and the lexan body, spreading the clamping load over a much larger surface area. The result: no more torn holes, no more flying wings.
Designed for 1/10 scale touring car bodies. The hole fits standard M2/M3 wing mounting screws. Print in PETG or ABS for best flexibility and durability — avoid PLA as it can crack under vibration.
Print settings:
Layer height: 0.15–0.2 mm
Infill: 40%+
No supports needed
2–3 perimeters recommended
Print two per car. Keep a spare set in your pit bag.
Stay on track. Keep your wing.