SideKick, the Prusa XL Filament Loader 6MM Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Sidekick filament loader to use 6mm ptfe tubes.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 341
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking forward to the Sidekick model from MrFlippant. Since I was using 6mm tubes on my XL, this was going to need modifications. I also included the bottom parts with spaces for brass inserts, since I was disassembling them many times during design and testing phase.
Assemble using the original instructions.
*** UPDATE ***
I've added a version for use with the stock filament sensor mount with 4mm bridge tubes.
Cut 3 PTFE tubes to 17.6mm using the 6mm jig. Use a countersink bit to put a chamfer on the end. |
|---|
![]() |
Mount the PTFE clamp and insert 4 M3-8 RH screws and tighten just enough hold the screws. |
![]() |
Mount on the XL as per the original instructions. Insert the PTFE tubes and tighten down the clamp. |
![]() |
All done! Happy Loading!


