Magnetic Attachments for Twilight Imperium 4th Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic attachments for planet modifiers in Twilight Imperium 4th Edition
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Printable markers for some of the planet attachments from Twilight Imperium 4.
Models were designed to use a neodymium magnet (10mm x 2mm) on one side and a washer (15mm ID, 5mm OD) on the other. The idea was to keep the strength reasonable and to not have to worry about polarity. All fittings are meant to be friction fit.
The models can be updated to any magnet/washer configuration via the variables in Onshape. Link: https://cad.onshape.com/documents/0e979ca7d698d107b8022c1e/w/a0a5554333b7d1c053b110f0/e/9afb05ea9fe5cfd6fc429cdc
All models are in magnet/washer pairs except the +1 Resource/+1 Influence Washer (x4), which are paired with one of each of Tech colour marker.
I got the best results when printing face down; no support is required and the insertion holes are flat. Printing face up often results in a droopy bridge which keeps the magnet/washer from inserting flat, especially if printed with multi-colors.