Snowboard Stomp Pad - Black Diamond (TPU/PLA)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An upgrade for my snowboard (and yours). It works much better than the foam pad that came with the board.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Designer notes: I made this to be printed with TPU, but it can also be made with PLA. Both work well in my testing, but I liked TPU better because it gripped my rubber-soled boots more. With TPU, a lower infill (25%) will allow it to flex just a bit too, allowing for more grip even when covered with snow. I chose black because it looks cool, but also because the dark color soaks up the sun on clear days and prevents snow or ice from sticking to it.
As per recommendation, I attached the stomp pad to my board using 3M VHB weather resistant tape. It hasn't failed yet.
Print notes: 3 walls, 25% infill or more. The original size is 176 mm/98 mm, small enough to print on most beds. The orientation should be obvious, without any supports. It took me just under 3 hours to print on my Ender 3.
I'm always open to seeing how my designs perform for you guys, post a comment to let me know how I can improve!