1 / 5
Headband bridge for Std and XL versions of Gearhead Quest 3 strap. — zdjęcie 1
1 / 5

Headband bridge for Std and XL versions of Gearhead Quest 3 strap.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I modified the battery bridge to be vertical so it mounts roughly in the middle of the halo so you don't need a strap.

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
128
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Share Alike

A modified version of the battery bridge to use as a headband close to the center of the head. The original bridge has been made vertical without the angled pitch, it's not flat horizontal across the top of the head to attach padding to the bottom.

You can scale it vertically to adjust the width to match the width of your padding.

The padding I used and can be seen in my pics, a $10 set of Memory foam padding I'm happy with. https://www.amazon.com/dp/B09X1R4P15

I used the same paddings in front of the temples on the halo too. This stops left right wobble in active games like Les Mills and thrill of the fight.

Tagi