xTool P2S Adapter for TwoTrees Honeycomb Bed (600x300mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for 600x300mm TwoTrees honeycomb bed in xTool P2S. Fixes material shifting. Needs 8x M4 bolts. Print in ABS.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
xTool P2S Adapter for TwoTrees Honeycomb Bed (600x300mm)
This custom-designed mount adapts a 600x300mm honeycomb panel to fit perfectly inside the xTool P2S laser cutter.
The Problem and Solution
When cutting materials like acrylic on the standard xTool P2S slats, small cutouts can fall and get stuck at an incline. This often leads to the laser head catching the protruding pieces, shifting the entire workpiece, and ruining the project.
To solve this, I 3D-scanned the P2S bed area and designed these adapter mounts. They are specifically made to accommodate one half of the TwoTrees 600x600mm Spliceable Honeycomb Working Table (which natively comes as two separate 600x300mm sections). These mounts perfectly center the 600x300mm honeycomb mesh and raise it to the level of the original slats (within a ~2mm tolerance).
Assembly and Hardware Requirements
You will need the following to complete this modification:
Honeycomb Bed: 1x 600x300mm section of the TwoTrees 600x600mm Spliceable Honeycomb Working Table. (You can find the exact product used for this mod here: AliExpress Link — Note: This kit comes with two 600x300mm halves; you will only need one half for the P2S.)
Mounting Hardware: 8x M4 bolts.
Printing Guidelines
Because this model will be used inside a laser cutter enclosure, it must be printed using a material that can withstand elevated temperatures.
Recommended Material: ABS, ASA, or an equivalent heat-resistant filament (Standard PLA is not recommended due to heat deflection).
Print Settings: I achieved a successful print using a standard ABS profile.
Important Disclaimer
Please use this modification at your own discretion.
Operating a laser cutter inherently involves heat and potential fire risks. This is an aftermarket modification and not an official xTool accessory. By downloading and using this model, you acknowledge that I accept no responsibility for any potential damage to your laser cutter or ruined materials resulting from its use.