1 / 6
Front Drive Shaft Extension for the Toyota 22RE Engine — zdjęcie 1
1 / 6

Front Drive Shaft Extension for the Toyota 22RE Engine

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a Front Drive Shaft Extension for the 22RE Toyota Engine (https://www.thingiverse.com/thing:644933).

Ocena
0 / 5
Polubienia
21
Pobrania
122
Wydruki
0
Wyświetlenia
777
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

This is a Front Drive Shaft Extension for the 22RE Toyota Engine (https://www.thingiverse.com/thing:644933).
The Drive Shaft is the same than the original : https://www.thingiverse.com/thing:1344976
The Axle Wheel Flange (2x) is the same than the original : https://www.thingiverse.com/thing:1344938

Print instructions

Printer: Geeetech A10

Rafts: No

Supports: No

Resolution: 0.15mm

Filament: Geeetech PLA Grey

Print Settings

1 x FrontDriveShaftBody : Layer:0.15mm Raft:no Support:no Infill:15%
2 x FrontDriveShaftBearing : Layer:0.15mm Raft:no Support:no Infill:100%

Accessories

1 x m4x25mm SHCS
2 x m4x20mm SHCS
2 x m4 jam nut
8 x m3x6mm SHCS
1 x m3x30mm SHCS
1 x m3 washer
2 x 623zz bearing

Mounting

Fix the "Front Drive Shaft Body" to the "Bell Housing" with the m4 screws and jam nuts (see the picture).
Mount the 623zz bearings on the two "Front Drive Shaft Bearing".
Fix the two "Front Drive Shaft Bearing" on the "Front Drive Shaft Body" with the m3x6mm screws.
Fix the "Axle Wheel Flange" with the m3x30mm screw and washer (see the picture).


More add-ons
https://cults3d.com/fr/collections-de-designs/dancan13f/toyota-22re-engine 

Tagi