1 / 7
Monolith X-Carriage MGN12H 6mm for Dragonburner w/ Inserts — zdjęcie 1
1 / 7

Monolith X-Carriage MGN12H 6mm for Dragonburner w/ Inserts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Monolith X-Carriage for MGN12H rails, 6mm belts & heat set inserts. For use with Dragonburner

Ocena
0 / 5
Polubienia
12
Pobrania
55
Wydruki
0
Wyświetlenia
402
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0
Revision Log
  • 2026-02-25 -- Initial Release

BOM:
  • Qty 8 - M3 Brass Inserts

  • Qty 6 - M3 x 16 Socket Head Cap Screws

Print Settings:

Material Used: Inland (Micro Center) PETG-CF

I just followed the Voron spec for this one:

Use PETG-CF or Better

  • Layer height: 0.2mm

  • Extrusion width: 0.4mm, forced

  • Infill percentage: 40%

  • Infill type: gyroid

  • Wall count: 4

  • Solid top/bottom layers: 5

  • Supports: SEE CUSTOM SUPPORT STL

Tagi