Royal QDL Typewriter Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Feet for Royal Quiet De Luxe Typewriter.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Measurements taken from the existing feet off my 1951 Royal QDL. I used the bolts from the existing feet to ensure that the typewriter would be able to latch into its case.
These feet fit the rectangle-based feet with metal caps.
I would recommend printing them out of some kind of TPU; softer is better, but 95a would probably work too. I printed mine out of eSun TPU-LW, with 100% Infill. Mine were printed to a shore hardness of about 80a. You could probably go even softer.
The softer the material, the better it will stop the typewriter from sliding around.
Before replacing the feet, this typewriter slid around the desk a lot, even with a giant mousepad under it. Now I don't notice it moving at all. Huge improvement.
The typewriter is able to lock into its case with these feet.