RepRap Fisher E3Dv6 effector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my design of an effector plate so that an E3Dv6 can be used on a RepRap Fisher.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Using carbon fibre rod arms means that no printable volume is lost and the head can still reach the extremities of the build plate. With the orignal fisher acylic arms, a bit is lost unfortunately.
Added a one piece bottom plate and nozzle, it is slightly harder to put together with this, but you get better airflow over the part being printed
Supports:
Yes
Resolution:
0.2mm Layers
Infill:
20%
Notes:
Printed using Form Futura Carbon Fil at 270 Degrees.
Post-Printing
It will need a selection of M3 hex bolts , nuts and washers, I had a selection box with many different sizes and just used what seemed to fit well.
It will take the standard nozzle air blower attachment from the fisher kit.
Designed in onshape, original version is public and editable here: