JMG123's remix of Airtight filament delivery system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of stephenmhall's "Airtight Filament delivery system (almost) " Not that there was anything wrong with…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of stephenmhall's "Airtight Filament delivery system (almost) " Not that there was anything wrong with the original, I just had an excess of 3mm hex bolts lying around, and no 4mm's that the original needed. I also wanted to have the filament coming out of the side rather than the top so that it is easily stackable.
I designed a bracket to hold an off cut of old broom handle in the middle of the box. The spools sit on this rather than the base of the box. It also allow me to use my loose filament spinner, which takes 5m,10m or 15m wraps of trial filaments.
The internal filament bracket can take some sponge for filament cleaning.
The whole thing was assembled with M3 hex bolts, and a little bit of silicone glue to make sure it all remains airtight.
Finally there is also a end cap that takes the 4mm pneumatic connectors to blank of the ends.
The files are public on onshape if anyone wants to edit it: https://cad.onshape.com/documents/96ed6b34967ef87b3c66c159/w/31bf8c8a457d058724dc3663/e/8667750df8ec5c391a52084c
Print Settings
Printer:
Reprap Fisher
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.25mm
Infill:
25%
Post-Printing
Things you'll also need
Pneumatic Connectors (8 are need , so the 10 pack will do nicely) https://www.amazon.co.uk/gp/product/B012T6O2B0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Lock & Lock Rectangular Container (12L) [https://www.amazon.co.uk/gp/product/B014Q8XHEC/ref=oh\_aui\_detailpage\_o02\_s00?ie=UTF8&psc=1](https://www.amazon.co.uk/gp/product/B014Q8XHEC/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1&tag=thingiverse09-20)A broom handle, or another 24mm or 25mm piece of tube.
Some silicone glue to seal everything https://www.amazon.co.uk/Stick-Silicone-Glue-Tube-Transparent-x/dp/B0038EHV6Q/ref=sr_1_1?s=kitchen&ie=UTF8&qid=1486923638&sr=1-1&keywords=silicone+glue
16 M3 Bolts, length not critical but at least >15mm, with nyloc nuts and washers.
Sponge (optional for wiping filament).
Category: 3D Printer Accessories