Unifi U7 In-wall on-wall surface mount spacer (5° tilt)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 5° wedge spacer for the Ubiquiti UniFi U7 In-Wall access point, designed to tilt the unit when mounted on a flat wall.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 634
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Unifi U7 In-wall surface mount spacer (5° tilt)
This is a custom-designed 5° wedge spacer for the Ubiquiti UniFi U7 In-Wall access point. It is designed to sit between the wall and the metal mounting bracket that comes included with the U7 In-Wall, fitting it perfectly without any modifications needed.
The spacer tilts the access point by 5° when mounted on a flat wall, which can help improve wireless coverage by angling the unit towards the area you want to cover rather than broadcasting straight out from the wall.
The spacer has been designed to match the mounting hole spacing of the original U7 In-Wall metal bracket exactly, with holes spaced 61mm apart so the bracket sits flush and secure. One side of the spacer is 27mm tall and the other 15.8mm, giving the 5° angle over a 128mm span. You can also use the included screws to mount it on the wall.
Ideal for hallway installations, stairwells, or any situation where your access point is mounted on a wall but you need to direct coverage at a slight downward or upward angle.