1 / 3
Kaminari Clara Vtuber Fountain Pen — zdjęcie 1
1 / 3

Kaminari Clara Vtuber Fountain Pen

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A fountain pen inspired by my favorite Vtuber.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
58
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Public Domain

A fountain pen inspired by my favorite Vtuber.

Printed in PLA with a 0.4mm Nozzle but I think PETG with a 0.2mm nozzle may be a better choice for durability and detail quality. To remove the cap twist while pulling the cap.  Same when capping the pen, twist while applying pressure.  Pulling on the cap directly can result in pulling out the guts of the pen.  The Pen clip is also a bit fragile, so please be careful when clipping and unclipping it.  Am working to beef up the hinge but no promises.

Requires the following:

Hong Dian #26 Nib

3.4mm Universal Chinese ink Cartridge (pen is too short for a full size converter)

Small O-Ring (1.5mm x 10mm)

2 neodymium magnets (10mm x 1mm) 

superglue

Paper clip for the clip pin and spring.

Some parts can benefit from a paint touch up, and if you plan on using it frequently, a topcoat to prevent staining may be recommended

I don't have a multicolor printer so all the parts are color separated.