Adapter for old Sunlu refill filament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter makes it possible to use the narrow Gen1 refills on the wider Gen3 spools
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I ordered some refills for the Gen1 spools as they were on sale and then found out, that Sunlu changed to incompatible Gen2 and then to Gen3 within two years or so. :(
As i now have some empty Gen3 spools, it was time to use them for the old refills. So i printed some adapters to reduce the width of the spool by 4.5 mm. This is tight but worked for me. Please check before printing, if this fits your needs and scale the thickness to the matching size. 4 mm might work, too. ;)
There's a little notch in the center that will fit into the key on the hub of the recent spools.
To reduce waste, i made two sizes. L with the full diameter of 200 mm and S with only 150 mm for filament that was in use already.
Gen1 spool:
Gen3 spool with adapter installed:
