Case & Lid for DROK 090845 Step Up Converter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for this DROK® Mini USB DC-DC 3V to 5V Step Up Converter.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This is the first 3D model that I have made. I could not find any previous case for this DROK® Mini USB DC-DC 3V to 5V Voltage Step Up Converter Volt Boost Regulator Module 2A Mobile Power Supply Charger Board with Battery Indicator. I used TinkerCad and an AI and https://www.formware.co/onlinestlrepair to get the file to work for me. I'm sure someone else can improve on it or come up with something better, but at least this is a start. It is a tight fit, but I found when cooled down from the intial print, I was able to get the device in the case smoothly and the lid snaps down to fully enclose it. Printed in Generic PLA should work fine in PETG.