1 / 3
PTO Control Tower with Cup Holder (Manual Air Control Value Mounting Bracket) — zdjęcie 1
1 / 3

PTO Control Tower with Cup Holder (Manual Air Control Value Mounting Bracket)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Integrated PTO control tower with cup holder designed for compact equipment and utility vehicle retrofits.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
1
Wyświetlenia
73
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Integrated PTO control tower and cup holder assembly designed for compact equipment and utility vehicle retrofits. Combines switch housing, lever interface, and beverage holder into a single rigid mounting unit.

Design Features

  • Integrated PTO switch mounting surface

  • Interface compatible with standard PTO control hardware

  • Reinforced cup holder sized for common insulated tumblers

  • Four-bolt base mounting pattern for secure installation

Material Recommendation

  • ASA or ABS for outdoor UV and temperature resistance

  • PETG acceptable for enclosed cabs

  • Avoid PLA

Print Settings

I have added slicer modifiers to optimize the geometry and infill for strength and material usage. I recommend using the 3MF provided. I have also included the STEP file for those that want to make changes.

https://buymeacoffee.com/prairieforge3d

Tagi