1 / 2
TPU Push-On Tire for Janod Baby Walker (J04410) — zdjęcie 1
1 / 2

TPU Push-On Tire for Janod Baby Walker (J04410)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TPU push-on tire for Janod Sweet Cocoon walker. No glue, no disassembly – just press onto the wheel.

Ocena
0 / 5
Polubienia
7
Pobrania
11
Wydruki
0
Wyświetlenia
111
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a push-on replacement tire designed for the Janod Multi-Activity Sweet Cocoon Baby Walker (J04410).

Print it in TPU and simply press it onto the existing plastic wheel — no glue, no tools, no wheel disassembly required.

The tire improves grip and reduces slipping on smooth floors while maintaining a soft contact surface.

It may also fit other walker wheels with similar dimensions.

Wheel dimensions (original wheel)

  • Maximum diameter: 106 mm

  • Minimum diameter: 100 mm

  • Width: 20 mm

Due to the slightly tapered profile (100–106 mm), the TPU material allows a secure interference fit.

If you need another size, feel free to ask — I can adapt the model.

Key Features

  • Designed for Janod Sweet Cocoon (J04410)

  • Push-fit installation

  • No glue required

  • No wheel removal needed

  • Improves traction

  • Floor-friendly

  • Fully 3D printable

Print Settings

  • Material: TPU (recommended, medium-soft works best)

  • Layer height: 0.2–0.28 mm

  • Infill: 100% recommended for durability

  • Supports: Not required

  • Print orientation: Flat on the bed

Notes

  • Fit may vary slightly depending on TPU hardness and printer tolerances

  • Works best on clean, smooth wheels

  • Always test fit before regular use

Disclaimer

This design is intended as a traction aid only. Always supervise children during use. Muffelkraft assumes no responsibility for improper installation or misuse.

Tagi