Cotton buds dispenser - holder - bathroom series
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Second of my bathroom series model, ear sticks dispenser / holder
- Ocena
- 5 / 5
- Polubienia
- 260
- Pobrania
- 574
- Wydruki
- 2
- Wyświetlenia
- 2193
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Second of my bathroom accessories series of 3D models in modern minimalistic design. I am presenting Cotton Buds dispenser / hodler.
I printed it on Elegoo Neptune 3 Pro with 0.4mm nozzle in PLA+ using 0.2mm layer height, 15% cubic infill.
Any comments and recommendations for improvements are welcomed
UPDATE 2026.03.10: As thanks for all the support I am adding alternate versions of Dispenser and Lid. All versions are compatible so it is up to you which base and lid you prefer. With alternate versions you can safe in total (using same settings as described below, without brims) ~23g of filament.
Approximate use of filament on recommended settings:
Model | Supports | Total | |
|---|---|---|---|
Original base | 73.72 g | 2.84 g | 76.56 g |
Alternate base | 61.04 g | 3.93 g | 64,97 g |
Original lid | 15.19 g | 9.23 g | 24.42 g |
Alternate lid | 10 g | 2.67 g | 12.67 g |
Dimensions:
Width: 89mm
Height: 115mm (90mm without lid)
Depth: 50mm-75mm
Files Included:
STL
Recommended Print Settings:
0.2 mm Layer Height
2 Perimeters
15%+ Infill
Supports Required
any PLA should work easily