Wax Scrapper for skis and Snowboards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sometimes you just need a way to get the wax off your board and you don't want to use a credit card or a butterknife.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Public Domain
I made this little scrapper because I couldn't find my real ones when i was waxing my board, I updated the modle after printing so the edges of the cutout are rounded to remove the fear of them scratching the base.
Printed on a Prusa Mk4 at %100 infill (not necessary to go so high but I figured it could be sharpened it as it gets dull rather than printing a new one, so I wanted material inside to work with. I used PLA but ASA or PETG would obviously be better for longevity.
$1800 CND for the printer -$4.99 for a new scrapper... yeah, I'm well on the way to profitability :D