CR-6 se No friction Spool Holder Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Watching spools jumping all over the original holder was driving me nuts, so i made it better
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 861
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is my solution to Creality’s spool holder, designed to work with CR-6 SE (it may work with other Creality printers, I think the mount is standard across)
Utilizes standard 608 ball bearings, the 3D models are made to fit these
https: //amzn.to/3mcKKBJ (..remove space after https:)
I have noticed other brands may be a bit loose but should be OK to use.
I also recommend adding a 4” wood screw for support (don’t know where mine come from, had a couple left from other projects) attaching dimensions for reference try find screw with similar diameter or smaller, length is not as important, screw must be installed with ball bearings on the shaft otherwise you risking cracking it. I have not tested using this assembly without reinforcing screw, but with high infill percentage it may be ok with 1Kg spools
Parts compatible with Universal Container Filament Spool Adapter
Printed and tested with 0.2mm layers in PET-G and PLA (not just by me)
Enjoy!!