Ford Fiesta mk8 Airvent Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made an Airventclip for various mounts (preferbly my smartphone). This is just the Clip so feel free to add your own…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 1782
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made an Airventclip for various mounts (preferbly my smartphone). This is just the Clip so feel free to add your own remix to the bunch.
Perfectly clips onto the part with the airvent dials in the middle of the console of an Ford Fiesta mk8 (2018- xxxx).
The Bottom part rests on the Passanger Airbag Indicator.
It sits firm and should be stable with ABS or PETG. Turn the Model on its head and generate supports for the bottom part and the clipers should come out perfectly.
Inflill. 100%, layerhight 0.25mm, printed with a 0.6mm nozzle on a Renkforce RF100XL at 215°C 50mm/s acceleration.
I just started messing with 3D Modeling and was personaly amazed at how well and how quickly i could pump out an fuctioning dashboard ornament for my new car.
Sadly the only alternative i found to this Clip was a Model for the bottom compartment in the Middleconsole infront of the gearshifter. So this Clip is for everyone that wants to mount something out of harms way when shifting rapidly.
Print Settings
Rafts:
Yes
Supports:
Yes
Resolution:
200
Infill:
100
Filament: Esun PLA+ PLA
Category: Automotive