Mute for ARTinoise re.corder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Every review I saw of the Artinoise re.corder mentioned worry about losing the mute, so here's one. I lack a 3D scanner, so this was made using photos and a protractor and assembled with Tinkercad. This is an unofficial replacement part not approved or endorsed by Artinoise in any way.
Shown here printed in translucent white PETG at 0.08mm on a Bambu A1 Mini. side by side with the real mute device. It's not 1:1 in every way, but it serves the same function.
Before doing ANYTHING with your re.corder, spend some time attempting to bend or break your print of the mute. It's friction fit, so tolerance matters a lot and you do not want it to break any part off into your instrument and you do not want to scratch or damage the instrument either.
If you don't know what it is: https://www.recorderinstruments.com/en/ can tell you about the device. I purchased mine online from Sweetwater Sound of Ft. Wayne, IN. Neither of those credits are sponsored or reimbursed.