2008 - 2021 WRX and STi Transmission Crossmember Bushings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These models are for the 4 transmission crossmember bushings. One of the models needs to be printed twice.
- Ocena
- 0 / 5
- Polubienia
- 0
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Standard Digital File License
Important Legal Disclaimer for Digital STL File
Product: 3D Printable STL File – Transmission Crossmember Bushing
Vehicle Fit: Subaru WRX (model-specific design)
About This Product
This listing provides a digital 3D model (STL file) only. No physical part is included. The STL file is intended for personal use, experimentation, prototyping, and educational purposes.
User Responsibility
The file is provided “as-is”.
The seller does not test, print, or certify the part for strength, fitment, or safety.
Any 3D-printed part created from this file is entirely your responsibility.
Do not assume that 3D-printed parts made from this file meet OEM specifications or are safe for structural or safety-critical applications.
Intended Use
This STL file is suitable for non-safety-critical applications, modeling, prototyping, or off-road/test use only.
Use in load-bearing, suspension, drivetrain, or safety-critical areas is at your own risk.
Always verify print settings, material choice, and post-processing for your intended use.
Liability Disclaimer
By purchasing this file, you acknowledge and agree that:
The seller assumes no liability for any damage, injury, loss, or failure resulting from printing or using this STL file.
You are fully responsible for material choice, print orientation, layer adhesion, and post-processing.
Use of the file for on-road or structural applications is strictly at your own risk.
