LGB bridge abutment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The missing link (abutment) between the LGB 50600 Truss Bridge and the LGB 50612/50613 bridge piers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I alwas thought that is was a big shame that LGB offered nothing to connect the 50600 Truss Bridge to their 50612, 50613 bridge piers.
This is now the missing link. it fits onto the bridge piers and the bridge can slot right into the holders.
It is a bit challenging to print. Hence I share the 3mf file. Print in low resolution to get the full details.
It needs a split, support enforcers and fuzzy skin. The mounts for the bridge have pins that slot into the main piece, they are design so that it is a unique fit for every side.
The abutment can be used for a bridge on one side or on both sides.
It has holes fitting to the wholes in the bridge to optionally fix the bride with some M3 screws.
If the abutment is used at the end of the bridge, the signs can be printed fit into the holes..