TPU Fish Pouch V2 and V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by the popular Squeeze Coin Pouches from a few decades back, this is a fun TPU container that looks like a fish
- Ocena
- 5 / 5
- Polubienia
- 229
- Pobrania
- 322
- Wydruki
- 3
- Wyświetlenia
- 2678
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This is the improved version of the Fish Pouch. Some of the most notable changes include a new tail design and the inclusion of a lid. The new tail design is easier to be printed out of TPU. The lid can just be printed out of PLA and prevents the mouth from opening while the lid is on, lowering the risk of small or skinny items slipping out. It is even compatible with the original version of the Fish Pouch (the one without lips) in case you are interested. The arrows inside the lid indicate which end of the lid should be oriented upwards in order to fit on the fish properly. The lid also looks like fish lips which adds some character to the design.
A 3mf file is also available in the files tab. It is a project file for Bambu Studio and already has all the slicer settings that I used ready to go. It does not include the lid, only the fish pouch. The extra rectangular block is there to give each layer of the print more time to set. It is not an important component for the final product, it is just there to help improve the quality of the print.
About the Fish Pouch
Carrying things around in a plain bag or case is boring and lacks style. Introducing the Fish Pouch, a small container made out of 90A TPU that looks like a fish. Simply squeeze the top and bottom of the mouth to open it and put items inside. A lid, which should be printed out of PLA or other stiff filament, is also included which slides snuggly over the opening of the pouch and helps prevent any items from falling out.
This idea was inspired by the Squeeze Coin Pouches/Purses that were popular a few decades back. Except instead of just carrying coins, this design can also carry dice, small materials and toys, wrapped candy, and so much more!
Print Settings for the Fish Pouch
use 90A TPU
use slower printing speed and acceleration for cleaner results
2 wall loops
0.2 layer height
10% infill
use gyroid infill
supports are optional (for underneath the eyes)
Print Settings for the Lid
use PLA or other stiff filament
2 wall loops
0.2 layer height
minimum of 10% infill
use Grid or Cubic infill
no supports