Pentair Champion Pump 355319 Strap Strainer Basket Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Had a broken Pentair Champion pool pump handle, so decided to make a simple model to replace it.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I had a broken Pentair Champion 355319 pool pump handle, so decided to make a simple model to replace it. The broken handle was allowing the pump strainer basket to rise up and leaves to bypass the strainer getting lodged in the pump impeller. Install is simple and just requires to slide the handle through the slots on the strainer basket and click the two sides of the handle onto the posts on the basket (see pictures).
Print Settings
Printer: BBL P1S
Filament: Overture PETG worked perfect for me
Quality: 0.2mm Layer Height
Walls: 4+ (just solid walls, no infill)
Infill: N/A
Top/Bottom Layers: 3 (not critical)
Supports: No
Print Time: ~45mins