Milwaukee Packout Organizer Inserts (Gen2 High Impact + HF Pittsburgh Impact Sockets)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Milwaukee Packout Organizer to store Milwaukee Gen2 High Torque Impact and Harbor Freight Impact Sockets
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 771
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Custom Inserts for the Milwaukee Packout Organizer (48-22-8430) to store Milwaukee Gen2 High Torque Impact and Harbor Freight Impact Sockets. Once printed, you will have to cut part of the packout "middle" wall to accomodate the anvil of the impact driver. (Gen2 High Torque is NOT the stubby impact - older larger impact driver)
Key #1 was shifted to accomodate a taller wheel lug key and have the lid close.
Key #2 was a shorter lug key for my spare
Wobble is a Huskey Impact Wobble extension.
You'll notice I had to make upper and lower parts to each side (right & left) to accommodate my print bed. I'll make a better joint at a later date.
Battery and impact fit snug.
You can glue the upper and lower halves if you want but they fit snug if you don't want to.
Designed with printing using PETG (spacing for sockets etc.)