1 / 4
Hose Hanger for the Cyclone Dust Collector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a hanging system for the vacuum hose while it is not in use aiding with portability and storage.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Share Alike
This model is an addition to the great Cyclone Dust Collector system. I needed a place to store my vacuum hose and help with transporting it with he collector around the house.
The hangers can easily carry 2m of 38mm hose. I printed 3 of them in PLA and secured them with 40mm M6 bolts. I would bump up the perimeters for extra strength
Print Settings.
Printer: Prusa MK3S
Filament: Filaform PLA+ V3 -
Layer height: .2
Infill: 25%
Brim: Yes
Support: No
Print time 4h 36Min