Gridfinity Bin For Hobby Razor Saw and Blades
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a custom Gridfinity Bin I made for a common style of Hobby Razor Saw that usually comes with four blades.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Introduction
Hello, and thanks for looking at my model!
I live own a three decker which means that even though I own my own home I also live in an apartment. This creates problems for hobbies like model making, scratch building and miniature painting for wargaming due to space constraints. It's fine to spread out when working on a hobby but that stuff needs to be packed away as small as possible when not in use. Milwaukee PACKOUT was the perfect answer to this - mostly. I have changed the stack once as two new pieces came out but it still needed some adjustment to make it perfect for my needs.
At first I was just using some random bins I found at the local dollar store to organize the drawers in my PACKOUT stack. This is less than ideal. The generic bins are not sized to use all the space in a drawer or use the space they take up efficiently. I have recently been going through my PACKOUT drawers and cabinets with Gridfinity and a few other things to make more efficient use of the space in my stack. I am actually starting to look for stuff to put in the drawers that I am organizing as they take up such little space with Gridfinity.
For reference the two drawer PACKOUTs I currently have in my stack are the three drawer PACKOUT 48-22-8447, the one with two of the short drawers on top and one large drawer on bottom. I also have the original three drawer PACKOUT 48-22-8443, the one with three equally sized drawers. I am using these excellent baseplates by @AlvarosK_398057. I used the optional pins when using his plates but I found no need for glue or double sided tape to hold them in. They fit very tight and keep themselves in.
This model was designed for one of the two slim drawers using @AlvarosK_398057's slim drawer baseplate but it's Gridfinity, you could use this bin in any standard baseplate. This is meant to fit a very common style of Hobby Razor Saw that generally comes with the same four blades and handle regardless of what no-name Chinese brand it's sold under. The bin is 1 x 5 x 4. It will fit in the four drawer or the top two drawers of the three drawer with two thin drawers and one deep drawer.
There is no side cutout to stick a finger into to get the handle out because I wanted to limit this to a 1 wide configuration to save as much space as possible. There was extra length after the handle that was not long enough for one of the blades though so I just made the tapered trench for the handle a little longer than necessary and that serves the same purpose. The blades all fit into their respective slots with room to spare so the blade kerf doesn't catch on the side. I made the slots for the two bigger blades these come with wide enough to put the blade back side in if you want. I prefer to have the poky bits facing down where they won't bite me accidentally so that's how they are in the photo.
Also, yes my saw is due for replacement. They are wonderful tools for modifying miniatures and scratch building but they are made of the finest Chinesium and the steel corrodes quickly. This saw is only five years old, has never been submerged in water and is clearly rusted just from humidity.
Further also, I do in fact realize that this bin does not match the red of the other bins I've printed so far. I tossed the last half roll of Overture Pro PLA I was using because it is hot garbage that kept jamming, snagging and caused two clogs. I am now using the remaining bits of random PLA I have hanging around for these bins. They're hobby bins that live in a drawer and I don't really care even a little that if they all match.
Razor Saw Used:
https://www.amazon.com/dp/B000EROWJ4
Print Settings:
The 3MF file is set to use Prusa's Generic PLA profile which honestly works pretty good for most PLA filament. Change it to whichever brand profile you use for your filament. Aside from that important settings used were: