Brass Catcher - Henry 22 Long Rifle Lever Action Rifle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2-piece brass catcher for a Henry H001-22L rifle.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Update - Feb 27, 2026 - fixed missing magnet recess in bin.
Brass catcher for Henry lever action 22LR. Base fits into the dovetail at the top of the receiver and the pieces are held together with two pairs of strong N52 neodymium magnets measuring 12mm in diameter and 2 mm thick. As a two piece, it allows you to remove and dump the bin without taking off the whole assembly. If you wanted a one-piece design, you could model a pair of 12mm diameter by 4mm thick plugs and super-glue it all together.
Printed in PETG but further testing needed. May have to adopt a filament with greater temperature resistance to handle hot brass.
No supports needed if printed as shown.