Overlord bookshelf diorama architecture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"Overlord" (LN/anime) themed architecture designed to fit a bookshelf row. Albedo figure *not* included :)
- Ocena
- 0 / 5
- Polubienia
- 72
- Pobrania
- 200
- Wydruki
- 0
- Wyświetlenia
- 1484
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Background information and process behind-the-scenes: https://myfigurecollection.net/blog/53778
The source .f3d file is included, if you want to adjust dimensions or make other edits. This is designed to fit the 35" wide IKEA HEMNES bookshelf.
File names should help see which pieces fit together in each arrangement (center, corner, side/end). For example, the center pillars use:
- square_pillar_bottom
- square_pillar_center_with_slot
- square_pillar_top
- square_pillar_balcony
- square_pillar_railing
The “top” and “balcony” pieces attach together with either super glue, or (preferably) a nut and screw (the center of mass is far forward, so they'll tip over otherwise). The “balcony” and “railing” pieces can just be glued together, with pieces of filament as guides if you want.
I printed each part using HATCHBOX Magic Stone PLA.