1 / 3
Seeed Studio Xiao NRF52850 & WIO SX1262 LoRa kit modular case system — zdjęcie 1
1 / 3

Seeed Studio Xiao NRF52850 & WIO SX1262 LoRa kit modular case system

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A modular case that has options for side panels, and battery holders to take 18350, 18650, and 21700 batteries.

Ocena
0 / 5
Polubienia
17
Pobrania
184
Wydruki
1
Wyświetlenia
1537
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This case has modular battery inserts to allow the use of 18350, 18650, and 21700 batteries.
The USB port of the Xiao is accessible, and there are two frames. One with just a power switch to wire inline with the battery, and another which also adds a reset switch.

I used 5mm toggle switch and momentary push button for my build as I find the tactile buttons nice to use, and they are recessed so that you don't accidentally knock them.

There are two panel designs included, and they use M3 screws to hold them in place.

There's spare room to modify the design for things like a GPS antenna which could fit over an 18350 or 18650 battery, and even a Type N antenna connector instead of the default SMA with 8mm hex.

The battery and reset pads are on the bottom of the main Xiao board, so please refer to your documentation to see where to solder the wires.

Tagi