1 / 4
Berker K1 for Reolink RLC-1212A — zdjęcie 1
1 / 4

Berker K1 for Reolink RLC-1212A

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for a Reolink RLC-1212A camera. This holder replaces the cover frame for a Berker K1 single socket.

Ocena
0 / 5
Polubienia
3
Pobrania
14
Wydruki
0
Wyświetlenia
92
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

We used to just screw the Reolink to a board and put that board on top of a bookcase. We did have a Berker K1 socket close to the window the Reolink was looking out of. So I went and designed a holder that could replace the cover frame of the single socket.

The holder is secured with the original socket part. The Reolink is secured with three M4x16 bolts and nuts. As can be seen in the photos the holder can be used in two orientations. There is space left to secure the nuts in both orientations.

I printed it with PLA. That seems secure enough. We haven't had a summer yet, so I don't know how long it will hold. This is the south side of the house.

It should be printed in the orientation it is in the file. The file is configured for a Prusa MK4S with support where needed.

Tagi