Angled Path Reflectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reflectors for a driveway or path. Best to print in ASA/PETG (or any filament that withstands the elements and UV rays).
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
I've modeled some driveway reflectors to line my driveway. I have 4 versions of model:
- 1 sided
- 2 sided (180 degrees)
- 2 sided (250 degrees)
- 3 sided (120 degrees)
The ground-stake screws into the bottom of any of the above, and the extension-pole adds 150mm height to the stake.
The reflectors are compatible with 48mm x 148mm stick on reflectors such as these.
These have been designed so that they will fit any Prusa printer, including the mini (180mm z height).
Recommended print settings are:
- 3 perimeters
- 15% infill
- 2mm brim
All parts are oriented as they should be put on the print bed, and these should not need any supports.